IA330 - 3.3M ISLAND INFLATABLE BOAT

+

5HP PARSUN OUTBOARD MOTOR

UNBEATABLE BOAT / MOTOR PACKAGE DEALS

IA330 Island Inflatable AIR-Deck Boat

Grey Trimming

The 3.3m Island Inflatable Boat with AIR-Deck Floor is best suited as the first size in the Island Inflatable range to use as a day / touring boat. Paired with the 5hp Parsun 4-stroke outboard motor, this Boat / Motor package gives you plenty of space and none of the hassles of registration and needing a boat licence (In most states). The Island 3.3m is also a perfect size boat to take away on holidays as its compact size and light weight makes it conveint to pack away in the back of car or caravan. The 5hp Parsun outboard will give you the convience of no licence / no Rego (In most states) with that little extra push in a fully loaded boat you wouldnt get with the 2.6hp Parsun.

Island Inflatable boats are Australian designed using the lastest "High Frequencey Thermo Welding" (HFTW) technics on all seams for durability against Australia's harsh conditions. You'll never have a Island Inflatable seam come apart due to heat or hot days due to HFTW.

It's not only our manufacturing processes which makes Island Inflatables the #1 selling privately owned brand in Australia. It's our unique features and attention to detail. Firstly all our boats are designed by "Island Inflatables". Most brands you see online and in-store are boats purchased at trade fairs with brand names then placed on them. 

Lets start with our materials. Island Inflatables use the heaviest grade of PVC material possible before going into the commercial grades used in the armed forces etc. Our grade is 1100 D-teck Denier / 0.9mm thickness. 

All out tubes sizes are oversized. This makes for a nicer riding boat. It's more comfortable to be sitting on the side of a inflatable with larger tubes. It also creates a much drier ride.

Island Inflatable transoms are constructed with marine ply coated with epoxy coating, rubber sealing on top. A Internal and External outboard mounting plate. As well as a 1 way bung which allows you to remove the bung and drive the boat to remove any excess water under the floor.

A good way to see if a inflatable boat is a quality inflatable boat is by the tow rings located at the front of the boat. Island Inflatable boats use a large heavy duty Stainless Steel tow ring. Mounted on a equally large and reinforced mounting patch. Lesser quality boats will always use a smaller ring and patch with no reinforcing.

Island Inflatable Boats pay special attention to wear and tear. We use non-marking rubbing / wear strips around the side and under the keel. 

All Island Inflatables come standard with a over-inflatation valve. Fitted to help with hotter days and increased air pressure.

On the underside of each oversized tube we apply a 2nd layer of PVC material. This helps when dragging or launching your inflatable off a beach. It gives that extra layer of protection from any hidden rocks / shells etc.

Island Inflatables off set the grab / safety rope to the side of the tube instead of the top. This is so when sitting on the tubes your not sitting on a uncomfortable rope.

Whats stands out most with the Island inflatable boats is the unique and very useful Internal Rear Carry Handles. This was our first desgin feature we come up with. As having the handles on the outside rear tubes makes it impossible for 1 people to carry the boat. Also the handles are made from a much harder material which can easily scratch your cruiser / yacht. So it made perfect sense to move the handles from the outside of the rear tubes to the inside.

Lastly the look/aesthetics of our Island Inflatable boats. Once again so much thought has been put into the colour schemes. You'll find models from 2m upto 2.9m are white and black. This is because in this size the main use is for tenders to larger cruisers / yachts. We want out Island Inflatables to compliment your pride and joy by blending in not standing out while floating off the back of your boat. The 3.3m up to 4.3m models are more day boats. We use a light grey colour so they hide and dirty marks easier plus the colour isnt dark enough to attract the heat of the sun and make it uncomfortable for you to sit on.

SPECIFICATIONS:

• Overall length:   3.3m /  10.10ft
• Inside length:   216cm
• Overall width:   165cm
• Inside width:   78cm
• Tube diameter:   45cm
• Chambers:   3 + Floor + Keel
• Person capacity:   4 Persons   
• Cargo capacity:   550kg
• Max motor power:   15hp / 11.2kw
• Boat weight (Boat/Floor/Oars/Seat):   45kg
• Floor options: Air-Deck  

Tube AIR Pressures in Squence of inflatation:

1. Outside Tubes:    3.6 PSI
2. Inflatable Floor:  10 PSI
3. Inflatable Keel:    3.6 PSI

FEATURES:

• Material: Heavy Duty 1100 D-Teck denier polyester coated PVC. Weight - 1100 g/m2 Thickness 0.9mm
• AIR-Deck Floor: High Pressure floor for ridget ride and firm to stand on.
• Inflatable keel
• Double layer of PVC mateerial on underside of tubes
• 2 Seats
• 2 Internal Rear Carry handles
• Combination Front Carry handle Bow ring with mooring rope
• 2 Heavy Duty Stainless steel tow rings with extra reinforcing
• Non-marking all round rubbing strakes.
• Off-set Safety / Grab ropes
• 24mm thick marine grade transom with rubber capping
• Inside / Outside motor plates
• Self bailing one way bung / drain plug
• Over inflatation valve
• 2 Internally sealed bulkheads to equalize tube pressures

STANDARD EQUIPMENT:

• Dual Action Hand Pump.
• Carry Bag
• Set of Oars
• 2 Seats
• Repair kit

ISLAND INFLATABLES BOATS

Australia's favourite inflatable boat since the summer of 2000

_____________________________________

PARSUN 5HP Short Shaft

4- Stroke OUTBOARD MOTOR

PARSUN’S 5HP outboard motor is compact with a large handle for easy transport. While being incredibly light weight and compact. The innovative CDI system provides trouble free Start-up. The F5 offers high fuel efficiency and ultra-low idle, and is more quiet for a smoother ride.

This model FBMS Parsun outboard comes in: 5hp, Manual Start, Tiller (Back) Control, Short Shaft configuration.

Main Features:        

• Exceptionally lightweight and compact   
• Easily monitored oil level gauge indicator    
• Innovative CDI system for an easy start and low idle    
• Twist grip throttle for safety and better maneuverability
• Safety lanyard for emergency shut-off
• Thermostat controlled water cooling system for consistent engine temperature
• 1.3LT integral fuel tank. With convenient external fuel tank fitting
• Efficient vibration reduction system for a smoother and quieter performance
• Ultra low emission, CE and EPA compliant   

PARSUN 5HP OUTBOARD MOTORS SPECIFICATIONS

• Engine type:      5-stroke,1-cylinder, OHV
• Displacement:    6.83 cu. in. (112 cc)
• Bore x Stroke:    2.32 in. x 1.61 in. (5.9 cm x 4.1 cm)
• Max. output:      5 hp (3.6 kw) @ 5000 rpm
• Ignition system: CDI
• Starting system: Manual
• Steering system:Tiller control
• Gear shift:          F-N-R
• Gear ratio:         2.08 (27/13)
• Trim and tilt system:        Manual
• Max. fuel consumption:    2 lt/hr
• Fuel tank capacity:          Built-in 1.3 lt
• Sump oil capacity:           0.5 lt
• Gear oil capacity:             6.1 cu. in. (100 cc)
• Dry weight:                    24 kg
• Recommended transom height:   15 inches (38.1 cm Short Shaft)
• Recommended fuel:        87% octane
• Recommended oil:          10W-30/10W-40

_____________________________

Pick-Up or Delievery options. The choice is yours.

With Multiple Parsun outboard dealerships located all around Australia, purchasing your Parsun outboard couldnt be easier. 

Your choices are:

1. Pick-Up directly from our retail outlet / warehouse in Sydney. 
2. If your located in anther area. Contact us and we can point you to your closest Parsun outboard dealership.
3. We can ship directly to you.
4. Or if you prefer to use your own frieght company we can prepare the engine to be picked up by the company of your choice.

Whichever suits you best we are willing to assist. Please contact us before ordering online so we can discuss your best option and arrange it for you prior to ordering.

PARSUN OUTBOARD HISTORY

Parsun Outboards have been available in Australia since the "Summer" of 2005. Distributed by Island Marine based in Sydney, Parsun outboards have become a major player in the smaller (under 100hp) outboard horsepower range. With hundreds of service centres located all around Australia, Back-up and support isnt far away for the average location. Parsun outboard parts are readily available online or over the phone at:

________________________________________________________________________________________