IA330 Island Inflatable AIR-Deck Boat

Grey Trimming




DUE IN september

The 3.3m Island Inflatable Boat with AIR-Deck Floor is best suited as the first size in the Island Inflatable range to use as a day / touring boat. paired with the European made 3hp REMIGO Electric outboard motor, this Boat / Motor package gives you plenty of space and none of the hassles of registration and needing a boat licence (In most states). The Island 3.3m is also a perfect size boat to take away on holidays as its compact size and light weight makes it conveint to pack away in the back of car or caravan. The REMIGO uses a adjustable shaft length. So it gives you the option of using this motor on both your Island Inflatable Tender. Then extend the leg out to a long shaft and use it as a motor on your yatch.

Island Inflatable boats are Australian designed using the lastest "High Frequencey Thermo Welding" (HFTW) technics on all seams for durability against Australia's harsh conditions. You'll never have a Island Inflatable seam come apart due to heat or hot days due to HFTW.

It's not only our manufacturing processes which makes Island Inflatables the #1 selling privately owned brand in Australia. It's our unique features and attention to detail. Firstly all our boats are designed by "Island Inflatables". Most brands you see online and in-store are boats purchased at trade fairs with brand names then placed on them. 

Lets start with our materials. Island Inflatables use the heaviest grade of PVC material possible before going into the commercial grades used in the armed forces etc. Our grade is 1100 D-teck Denier / 0.9mm thickness. 

All out tubes sizes are oversized. This makes for a nicer riding boat. It's more comfortable to be sitting on the side of a inflatable with larger tubes. It also creates a much drier ride.

Island Inflatable transoms are constructed with marine ply coated with epoxy coating, rubber sealing on top. A Internal and External outboard mounting plate. As well as a 1 way bung which allows you to remove the bung and drive the boat to remove any excess water under the floor.

A good way to see if a inflatable boat is a quality inflatable boat is by the tow rings located at the front of the boat. Island Inflatable boats use a large heavy duty Stainless Steel tow ring. Mounted on a equally large and reinforced mounting patch. Lesser quality boats will always use a smaller ring and patch with no reinforcing.

Island Inflatable Boats pay special attention to wear and tear. We use non-marking rubbing / wear strips around the side and under the keel. 

All Island Inflatables come standard with a over-inflatation valve. Fitted to help with hotter days and increased air pressure.

On the underside of each oversized tube we apply a 2nd layer of PVC material. This helps when dragging or launching your inflatable off a beach. It gives that extra layer of protection from any hidden rocks / shells etc.

Island Inflatables off set the grab / safety rope to the side of the tube instead of the top. This is so when sitting on the tubes your not sitting on a uncomfortable rope.

Whats stands out most with the Island inflatable boats is the unique and very useful Internal Rear Carry Handles. This was our first desgin feature we come up with. As having the handles on the outside rear tubes makes it impossible for 1 people to carry the boat. Also the handles are made from a much harder material which can easily scratch your cruiser / yacht. So it made perfect sense to move the handles from the outside of the rear tubes to the inside.

Lastly the look/aesthetics of our Island Inflatable boats. Once again so much thought has been put into the colour schemes. You'll find models from 2m upto 2.9m are white and black. This is because in this size the main use is for tenders to larger cruisers / yachts. We want out Island Inflatables to compliment your pride and joy by blending in not standing out while floating off the back of your boat. The 3.3m up to 4.3m models are more day boats. We use a light grey colour so they hide and dirty marks easier plus the colour isnt dark enough to attract the heat of the sun and make it uncomfortable for you to sit on.


  • Overall length:   3.3m /  10.10ft
  • Inside length:   216cm
  • Overall width:   165cm
  • Inside width:   78cm
  • Tube diameter:   45cm
  • Chambers:   3 + Floor + Keel
  • Person capacity:   4 Persons   
  • Cargo capacity:   550kg
  • Max motor power:   15hp / 11.2kw
  • Boat weight (Boat/Floor/Oars/Seat):   45kg
  • Floor options: Air-Deck  

Tube AIR Pressures in Squence of inflatation:

  1. Outside Tubes:    3.6 PSI
  2. Inflatable Floor:  10 PSI
  3. Inflatable Keel:    3.6 PSI


  • Material: Heavy Duty 1100 D-Teck denier polyester coated PVC. Weight - 1100 g/m2 Thickness 0.9mm
  • AIR-Deck Floor: High Pressure floor for ridget ride and firm to stand on.
  • Inflatable keel
  • Double layer of PVC mateerial on underside of tubes
  • 2 Seats
  • 2 Internal Rear Carry handles
  • Combination Front Carry handle Bow ring with mooring rope
  • 2 Heavy Duty Stainless steel tow rings with extra reinforcing
  • Non-marking all round rubbing strakes.
  • Off-set Safety / Grab ropes
  • 24mm thick marine grade transom with rubber capping
  • Inside / Outside motor plates
  • Self bailing one way bung / drain plug
  • Over inflatation valve
  • 2 Internally sealed bulkheads to equalize tube pressures


  • Dual Action Hand Pump.
  • Carry Bag
  • Set of Oars
  • 2 Seats
  • Repair kit


Australia's favourite inflatable boat since the summer of 2000



remigo one


adjustable short / long Shaft


Introducing the worlds first fully intergrated 1000W electric outboard motor. Designed and manufactured in Slovenia EU. This has to be the best looking Electric Outboard on the market. The looks aren't its best features. The design and functions are. Read below to find out more.

The First thing you'll notice about the REMIGO Electric outboard motor is its sleek aerodymanic desgin. Unlike any other outboard. Not only does this design look expectional but it has a purpose. The REMIGO is the first electric outboard to house their 1085 Li-lon Batteries inside the shaft of the outboard. This Intergrated Battery system make use of the leg. Hides the batteries and makes this electric outboard a fully 1 piece design. There is no leads or plugs or pins to fail or corrode. The complete motor is fully waterproof rated at IP67 for parts above the water and IP69 for parts below.

The REMIGO has a simple 2 button control system for speed and direction. Magnetic Safety Cut-off Switch. Plus a custom designed 2 blade propeller for maximized electric outoard efficiency. The 2 blade propeller has less drag in the water when not in use.

There is a 2-part mounting bracket. Which allows for the motor body to be quick released and reduced wieght for ease of transporting. Total wieght of the motor is 12kg without the bracket on. This is much lighter then the old 2-stroke 3hp outboards which were so easy to transport back in the day. 

It comes with a multifunctional handle > Steering > Tilting > Carrying & its locks into a central position.



  • Power: 1KW
  • Power Captible with a Petrol motor: 3hp
  • Shaft Length:   Fully adjustable from Short (15 Inch) to Long (20 Inch) shaft
  • MAX Propller RPM: 1000 rpm
  • Weight:   12kg (14.5kg with Bracket)
  • Thrust:   Up to 1500kg boats
  • Battery:   Intergrated 1085 Wh Li-lon
  • Nominal Voltage:   36V
  • Final Charging Voltage:   42V
  • Rated input voltage AC charger:   100 - 240 V, 50 - 60Hz
  • Rated input voltage DC charger:   12 - 24V
  • Attaching method: 2 Clamp Screws
  • Control:   2-Button control
  • Control Direction:  Forward / Neutral / Reverse
  • Steering:   Lockable
  • Tilting:   Manual with grounding protection
  • Tilt:   Manual, 4 positions
  • Waterproof rating: IP67
  • Measurements:   1250mm x 295mm x 90mm
  • Warranty:   2 Years



  • Standard 240V Supplied with motor:           6 Hrs
  • Faster Charger Optional accessory:             3 Hrs
  • DC 12 - 24V Charger Optional accessory:    12 Hrs


MODE:               SPEED IN KNOTS (KM/H)       RANGE IN NM (KM)

  • Eco:             2.0  (3.7)                                    30  (55)
  • Cruise:         3.0  (5.5)                                    14  (25.6)
  • Full Speed:   5.0  (9.2)                                    4.9  (9.1)


Intergrated batteries and watertight casing

Battery intergrated in the aluminum unibody means its fully protected from all weather conditions. It contains enough battery power to get you more than 14 miles of range at a 3 mph cruising speed on an averge size tender boat. Come rain / hail or shine the RemigoOne wont mind at al - waterproof, resilient, withstanding temperatures between -30C to 50C

In order to recharge RemigoOne, you cn plug it into any 240AC wall socket with the included AC charger and top it up in 6hrs. Or you can purchase the additioanl FAST charger avaliable in our online store, that will fill that battery up in only 3hrs. 

What about if your nowhere near a power point? Which can happy easily on a weekend away on your boat. No need to worry as we have you covered with our alternative low voltage (12-24v) DC source like solar panels or an onboard generator which can be used with the DC Charger. It allows you to charge the battery in 12hrs without ever removing the RemigoOne from your boat.



adjustable shaft lengths.

RemigoOne was built to efficiently propel any vessel weighing up to 1500kg This includes anything boat from small inflatable boat tenders up to sailing and fishing boats. The stepless shaft length adjustment allows you to find precise poistion for best motor performance anywhere between 15 to 20 inches of height which is equivalent to a short to long shaft outboard motor. By simply loosening 3 screws.

The main advantage of being able to adjust from a short shaft to a long shaft is people who like to use a electric outboard on both their tender and larger boat without having to purchase to 2 different motors. 1 with a short shaft and 1 with a long shaft.

When using it on a sailboat you can lock the tiller in neutral position and use your primary rudder for steering.



simplified interaction

When RemigoOne designed the outboard interface they wanted to get rid of all the unnecessary information and functions. The result is an intuitive interface with a 2-button steering control with 10-step forward / neutral / backward logic.

The magnetic killswitch or safety lanyard at the bottom of the interface is used as a key ON / OFF button. As well as an emergency switch. You simply attach the kill switch cord around your wrist for safety. Use the 2 buttons to go forward or reverse and controlling the speed. Button down means adding speed in the forward direcion, while upper buttong means slowing the speed down while in front.

Continuous pressing of the upper buttom after reaching neutral will put the motor into reverse.

There is a quick action button which is pressing the 2 buttons together will shut the motor down even at high speed.



  • FAST Charger
  • 12V Charger
  • Backpack Carry Bag


Mr Boats / Island Marine is Australia's #1 expert when it comes to Electric Outboard motors.

We were the first company in Australia looking into electric outboards when we imported our first electric outboard back in 2008. 

Package Includes:

  • REMIGO Electric outboard motor
  • IA330 Island Inflatable Boat
  • 2 Seats
  • Dual Action Hand Pump
  • Pair of Oars
  • Carry Bag
  • Repair Kit
Model # IA330-REMIGO
Brand Island Inflatables
Artist / Author 3.3m ISLAND INFLATABLE BOAT 3HP REMIGO ELECTRIC OUTBOARD 11ft Island Air-Deck Boat Electric Outboard Epropulsion spirit 1 plus
Shipping Weight 52.0000kg
Shipping Width 0.550m
Shipping Height 0.900m
Shipping Length 1.000m
Shipping Cubic 0.495000000m3
Type 3.3m ISLAND INFLATABLE BOAT 3HP REMIGO ELECTRIC OUTBOARD 11ft Island Air-Deck Boat Electric Outboar
Format 3.3m ISLAND INFLATABLE BOAT 3HP REMIGO ELECTRIC OUTBOARD 11ft Island Air-Deck Boat Electric Outboard Epropulsion spirit 1 plus

Be The First To Review This Product!

Help other Mr Boats users shop smarter by writing reviews for products you have purchased.

Write a product review