3HP ELECTRIC OUTBOARD MOTOR
adjustable short / long Shaft
Introducing the worlds first fully intergrated 1000W electric outboard motor. Designed and manufactured in Slovenia EU. This has to be the best looking Electric Outboard on the market. The looks aren't its best features. The design and functions are. Read below to find out more.
The First thing you'll notice about the REMIGO Electric outboard motor is its sleek aerodymanic desgin. Unlike any other outboard. Not only does this design look expectional but it has a purpose. The REMIGO is the first electric outboard to house their 1085 Li-lon Batteries inside the shaft of the outboard. This Intergrated Battery system make use of the leg. Hides the batteries and makes this electric outboard a fully 1 piece design. There is no leads or plugs or pins to fail or corrode. The complete motor is fully waterproof rated at IP67 for parts above the water and IP69 for parts below.
The REMIGO has a simple 2 button control system for speed and direction. Magnetic Safety Cut-off Switch. Plus a custom designed 2 blade propeller for maximized electric outoard efficiency. The 2 blade propeller has less drag in the water when not in use.
There is a 2-part mounting bracket. Which allows for the motor body to be quick released and reduced wieght for ease of transporting. Total wieght of the motor is 12kg without the bracket on. This is much lighter then the old 2-stroke 3hp outboards which were so easy to transport back in the day.
It comes with a multifunctional handle > Steering > Tilting > Carrying & its locks into a central position.
- Power: 1KW
- Power Captible with a Petrol motor: 3hp
- Shaft Length: Fully adjustable from Short (15 Inch) to Long (20 Inch) shaft
- MAX Propller RPM: 1000 rpm
- Weight: 12kg (14.5kg with Bracket)
- Thrust: Up to 1500kg boats
- Battery: Intergrated 1085 Wh Li-lon
- Nominal Voltage: 36V
- Final Charging Voltage: 42V
- Rated input voltage AC charger: 100 - 240 V, 50 - 60Hz
- Rated input voltage DC charger: 12 - 24V
- Attaching method: 2 Clamp Screws
- Control: 2-Button control
- Control Direction: Forward / Neutral / Reverse
- Steering: Lockable
- Tilting: Manual with grounding protection
- Tilt: Manual, 4 positions
- Waterproof rating: IP67
- Measurements: 1250mm x 295mm x 90mm
- Warranty: 2 Years
- Standard 240V Supplied with motor: 6 Hrs
- Faster Charger Optional accessory: 3 Hrs
- DC 12 - 24V Charger Optional accessory: 12 Hrs
MODE: SPEED IN KNOTS (KM/H) RANGE IN NM (KM)
- Eco: 2.0 (3.7) 30 (55)
- Cruise: 3.0 (5.5) 14 (25.6)
- Full Speed: 5.0 (9.2) 4.9 (9.1)
Intergrated batteries and watertight casing
Battery intergrated in the aluminum unibody means its fully protected from all weather conditions. It contains enough battery power to get you more than 14 miles of range at a 3 mph cruising speed on an averge size tender boat. Come rain / hail or shine the RemigoOne wont mind at al - waterproof, resilient, withstanding temperatures between -30C to 50C
In order to recharge RemigoOne, you cn plug it into any 240AC wall socket with the included AC charger and top it up in 6hrs. Or you can purchase the additioanl FAST charger avaliable in our online store, that will fill that battery up in only 3hrs.
What about if your nowhere near a power point? Which can happy easily on a weekend away on your boat. No need to worry as we have you covered with our alternative low voltage (12-24v) DC source like solar panels or an onboard generator which can be used with the DC Charger. It allows you to charge the battery in 12hrs without ever removing the RemigoOne from your boat.
adjustable shaft lengths.
RemigoOne was built to efficiently propel any vessel weighing up to 1500kg This includes anything boat from small inflatable boat tenders up to sailing and fishing boats. The stepless shaft length adjustment allows you to find precise poistion for best motor performance anywhere between 15 to 20 inches of height which is equivalent to a short to long shaft outboard motor. By simply loosening 3 screws.
The main advantage of being able to adjust from a short shaft to a long shaft is people who like to use a electric outboard on both their tender and larger boat without having to purchase to 2 different motors. 1 with a short shaft and 1 with a long shaft.
When using it on a sailboat you can lock the tiller in neutral position and use your primary rudder for steering.
When RemigoOne designed the outboard interface they wanted to get rid of all the unnecessary information and functions. The result is an intuitive interface with a 2-button steering control with 10-step forward / neutral / backward logic.
The magnetic killswitch or safety lanyard at the bottom of the interface is used as a key ON / OFF button. As well as an emergency switch. You simply attach the kill switch cord around your wrist for safety. Use the 2 buttons to go forward or reverse and controlling the speed. Button down means adding speed in the forward direcion, while upper buttong means slowing the speed down while in front.
Continuous pressing of the upper buttom after reaching neutral will put the motor into reverse.
There is a quick action button which is pressing the 2 buttons together will shut the motor down even at high speed.
OTHER ACCESSORIES OPTIONS: (Not Included)
- FAST Charger
- 12V Charger
- Backpack Carry Bag